114
Pumps
BVP-Z Standard
BVP-Z Standard without dispensing functions
3-digit potentiometer (for speed setting)
Over 20 interchangeable Micropump
®
pumpheads
Flow rates and differential pressure depend on the
pumphead mounted
BVP-Z Standard
with interchangeable gear
pumpheads (see page 116)
(material options, see Page 110)
Part No.
Includes
The complete pump system BVP-Z Standard consists of:
ISM446B
Drive (magnet included), Page 114
Order the Following to Complete the BVP-Z Standard Pump System
Pumphead, Page 116
2 Nozzles, Pages 113, 116
Accessories, Page 109
ISM891
Foot switch, Page 109
The complete pump system MCP-Z Standard consists of:
ISM405
Drive (magnet included), Page 114
Order the Following to Complete the MCP-Z Standard Pump System
Pumphead, Page 116
2 Nozzles, Pages 113, 116
Accessories, Page 109
IS10039
Foot switch, Page 109
MCP-Z Standard
MCP-Z Standard with Dispensing Functions
Membrane key-pad, LED display
4 program memories for saving individual application parameters
Over 20 interchangeable Micropump pumpheads (pre-programmed)
Flow rates and differential pressure depend on the
pumphead mounted
MCP-Z Standard
with interchangeable gear
pumphead (see page 116)
(material options, see Page 110)
BVP-Z Standard
MCP-Z Standard
Motor Type
DC motor
DC motor
Speed
60 – 6,000 rpm
60 – 6,000 rpm
Speed Setting
1 – 99.9%, resolution 0.1%
3-digit potentiometer
rpm, resolution 1 rpm
Flow Rate Setting
µL/min, mL/min, L/min
Power Consumption
150 W
150 W
Mains Connection
230V
AC
/50Hz,115V
AC
/60Hz
selectable
230V
AC
/50Hz,115V
AC
/60Hz
selectable
Protection Rating
IP 30
IP 30
Depth/Width/Height
220 x 155 x 260 mm
(without pumphead)
220 x 155 x 260 mm
(without pumphead)
Weight
5.7 kg (without pumphead) 6.4 kg (without pumphead)
Specifcations
BVP-Z Standard
Single-channel delivery processes under pressure for particulate-free fuids,
e.g.: addition of reagents/solvents in organic synthesis at laboratory scale
Pumping propylene oxide into a laboratory reactor with a dispensing
precision of +/–1% and a differential pressure of up to max. 3 bar
MCP-Z Standard
Single-channel delivery and dispensing processes of particulate-free
fuids under pressure
With pumpheads GJ-N23 and GA-X21: Pulseless dispensing under
pressure of different reagents with 2 pumps in different quantity ratios
via a mixing valve into a reactor
Application Note
Interfaces
MCP-Z Standard
PC-controllable
RS232
Speed control (0 – 5 or 0 – 10V,
0 – 20 or 4 – 20mA)
Speed output
(0 – 10V
DC
or 0 – 12 kHZ)
Start/stop
Autostart
BVP-Z Standard
Speed control
(0 – 5 or 0 – 10V,
0 – 20 or 4 – 20mA)
Speed output
(0 – 10V
DC
or 0 – 12 kHZ)
Start/stop
Gear Pumps
FOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com