123
Pumps
Pumphead
Q0 and Q3
Q0 = stroke vol.
3.2 – 80 µL
Q3 = stroke vol.
51.2 – 1,280 µL
Q0 = fow rate
0.04 – 144 mL/min
Q3 = fow rate
0.51 – 2,300 mL/min
Part No.
FMI202
FMI316
FMI217
Type
QP Q0.SSY
QP Q0.SKY
QP Q3.CKC
Piston
316 Stainless Steel
316 Stainless Steel
Ceramic
Cylinder Case
316 Stainless Steel
Kynar
®
(Fluorocarbon {PVDF})
Kynar (Fluorocarbon {PVDF})
Cylinder Liner
Carbon
Carbon
Ceramic
Lip Seals
Rulon
®
J
Rulon J
Rulon AR
Gland Washers
PTFE
PTFE
PTFE
Cylinder Head Seal
PTFE
none
none
Max. Temperature
60 ºC
60 ºC
100 ºC
Max. Differential Pressure
6.9 bar
4.1 bar
1.7 bar (to 1,600 rpm) 0.5 bar (from 1,600 rpm)
Flow Ports
1/4 NPT (female) Includes: 2 stainless steel
adapters with thread 1/4 NPT (male) and
ftting for tubing with 6.4 mm ID
for tubing up to 12.7 mm ID Includes: 2 Kynar
(PVDF) adapters for tubing with 6 mm OD
for tubing up to 12.7 mm ID or PTFE tubing
6 mm OD Includes: 2 Kynar (PVDF) adapters
for tubing with 6 mm OD
Q-TypePumpheads
Pumpheads
Q1 and Q2
Q1 = stroke vol.
12.8 – 320 µL
Q2 = stroke vol.
28.8 – 720 µL
Q1 = fow rates
0.13 – 576 mL/min
Q2 = fow rates
0.29 – 1,300 mL/min
Part No.
FMI205
FMI212
FMI320
FMI321
FMI219
FMI218A
Type
QP Q1.CSC
QP Q2.CSC
QP Q1.CSC-W QP Q2.CSC-W QP 1.CSC-WT QP Q2.CSC-WT
Piston
Ceramic
Material and design like QP Q1.CSC
and CP Q2.CSC but with isolation gland
(2 extra ports 10–32 – female)
Thanks to a barrier gland of fuid, gas, steam
or whatever is needed, the pumped fuid can
be isolated from the seal area and atmosphere.
Slurries, particulates, crystal formers and
anaerobics are easily handled.
Includes for barrier gland ports:
2 Polypropylene adapters,thread 10–32 UNF
and ftting for tubing with 3.2 mm ID
Material and design like QP Q1.CSC and
CP Q2.CSC but with isolation gland (2 extra
ports 1/8” NPT – female)and heating mantel
Same barrier gland as described under
CP Q1./Q2.CSC-W In addition, 2 cartridge h
eaters (1/4” diam. x 1 1/2” long) and 1 thermo-
couple (1/8” diam. x 1” long) can be used for
heating the pumphead.
Not included: Tubing adapters for:
• barrier gland ports 1/8” NPT (female)
• main fow ports 1/4” NPT (female)
Cylinder Case
316 Stainless Steel
Cylinder Liner
Ceramic
Lip Seals
Rulon AR
Gland Washers
PTFE
Cylinder Head Seal
PTFE
Max. Temperature
177 ºC
Max. Differential Pressure
6.9 bar (100 psi)
Main Flow Ports
1/4 NPT (female) Includes:
2 stainless steel adapters with thread 1/4 NPT
(male) and ftting for tubing with 9.5 mm ID
Rotary Piston Pumps
Tubing
(must be ordered separately)
Tubing and connections (must be ordered separately)
Part No.
Tubing ID
Part No. Description
Tygon ST R-3603
For pumpheads with the suffx -W or -WT
SC0383A
9.5 mm
FMI060 2 stainless steel fttings for inlet/outlet, thread
1
/
4
” NPT male, with fttings for
tubing with 6.4 mm ID
Accessories
MF0031 Tubing for inlet/outlet (Tygon ST R-3603) 6.4 mm ID, 15 m long
FMI056A
Low Flow Kit R 479
Tubing (must be ordered separately)
Part No. Tubing ID
Part No.
Tubing ID
Part No.
Tubing ID
Tygon
®
ST R-3603
Tygon ST R-3603
Tygon ST R-3603
MF0031 6.4 mm
SC0382
12.7 mm
SC0382
12.7 mm
Accessories
PTFE Tubing
PTFE Tubing
FMI056A Low Flow Kit R 479
(see below)
MF0336
4 mm / 6 mm,
3.6 m long
MF0336
4 mm / 6 mm,
3.6 m long
FOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com