166
Filters & Frits
P-270
P-373
P-275
P-372
Frit-In-A-Ferrule
™
Seals and flters simultaneously
Less expensive and more convenient than traditional inline
flter systems
Available in both Flangeless and Super Flangeless
™
versions
Now you can flter at any point in your system where 1/16” or 1/8” OD
tubing is used in a fat-bottom 1/4-28, M6 or 5/16-24 connection.
The Upchurch Scientifc
®
Frit-In-A-Ferrule product line is designed
to seal and flter simultaneously by incorporating a frit into the body
of a fat-bottom ferrule. This simple design allows you to eliminate
traditional inline flters and reduce thenumber of additional connections
in your system.
Specialty Filters
Part No. Description
Porosity Frit Material Frit Diameter Frit Thickness Swept Volume Maximum Pressure Qty.
Frit-In-A-Ferrule For 1/16" OD Tubing
P-270x Super Flangeless, Natural PEEK
™
, SST lock ring 2 µm
SST
0.062”
0.062”
0.74 µL
2,500 psi (172 bar)
10-pk
P-271x Super Flangeless, Black PEEK, SST lock ring
0.5 µm
SST
0.062”
0.062”
0.61 µL
2,500 psi (172 bar)
10-pk
P-272x Flangeless, Green PCTFE
2 µm
SST
0.062”
0.062”
0.74 µL
2,000 psi (138 bar)
10-pk
P-273x Flangeless, Blue PCTFE
0.5 µm
SST
0.062”
0.062”
0.61 µL
2,000 psi (138 bar)
10-pk
P-274x Super Flangeless, Natural PEEK, SST lock ring 2 µm
PEEK
0.046”
0.030”
0.20 µL
2,500 psi (172 bar)
10-pk
P-275x Super Flangeless, Black PEEK, SST lock ring
0.5 µm
PEEK
0.046”
0.030”
0.16 µL
2,500 psi (172 bar)
10-pk
P-276x Super Flangeless, Red ETFE, SST lock ring
10 µm
SST
0.062”
0.062”
0.90 µL
2,500 psi (172 bar)
10-pk
Frit-In-A-Ferrule For 1/8" OD Tubing
P-370x Super Flangeless*, Natural PEEK, SST lock ring 2 µm
SST
0.094”
0.062”
1.69 µL
2,500 psi (172 bar)
10-pk
P-371x Super Flangeless*, Black PEEK, SST lock ring
0.5 µm
SST
0.094”
0.062”
1.41 µL
2,500 psi (172 bar)
10-pk
P-372x Flangeless, Green PCTFE
2 µm
SST
0.094”
0.062”
1.69 µL
500 psi (34 bar)
10-pk
P-373x Flangeless, Blue PCTFE
0.5 µm
SST
0.094”
0.062”
1.41 µL
500 psi (34 bar)
10-pk
P-374x Super Flangeless*, Natural PEEK, SST lock ring 2 µm
PEEK
0.094”
0.042”
1.15 µL
2,500 psi (172 bar)
10-pk
P-375x Super Flangeless*, Black PEEK, SST lock ring
0.5 µm
PEEK
0.094”
0.042”
0.96 µL
2,500 psi (172 bar)
10-pk
Disposable HPLC Sample Filters
B-100 Disposable Filters
2 µm
SST
—
—
—
—
100-pk
B-101 Disposable Filters
0.5 µm
SST
—
—
—
—
100-pk
*The 1/8” Super Flangeless versions cannot be used in M6 ports.
Nuts that can be used with the Frit-In-A-Ferrule line:
Super Flangeless, pages 21 – 23 and 30 – 31
Flangeless, pages 24 – 27 and 30
Related Products
DisposableSampleFilters
Excellent system protection
Ultra-low hold-up volume
0.5 µm and 2 µm porosity
These Disposable Sample
Filters are designed to remove
particles fromanalytical HPLC
samples. The polypropylene
holder incorporates a 1/32”
thick, 1/8” diameter stainless
steel frit, which causes very
little back pressure. To use,
just attach one of these flters
onto the end of any standard
luer syringe, such as our B-310
found on page 155.
B-100 and B-101
Disposable Sample Filters
Top Seller
See starred products
P-372
Flangeless Frit-In-A-Ferrule
for 1/8” OD tubing
P-276
Super Flangeless Frit-In-A-Ferrule
for 1/16” OD tubing
0.19”
(0.48 cm)
0.16”
(0.41 cm)
0.19”
(0.48 cm)
0.19”
(0.48 cm)
FOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com