20
Fittings
1/16”ODPEEK
™
TubingSleeves
For connecting capillary tubing to standard 10-32 ports
Require the use of wrench tightened stainless steel nuts
Pressure rated to 6,000 psi (414 bar)
Like the NanoTight
™
FEP Sleeves on the previous page, these PEEK
Tubing Sleeves are designed to be usedwith 1/16”OD, 10-32 threaded
fttings to adapt capillary tubing to standard coned ports. Made of
PEEK polymer, these 1.3” long sleeves can be used up to 125 °C.
These sleeves require a wrench tightened nut to achieve proper
sealing. We recommend the F-140 Two-Piece Fingertight Fitting
(page 15), which includes a PEEK ferrule or the hex-head SealTight
™
fttings on page 16. Many researchers also use a stainless steel nut
and ferrule with these sleeves, such as our U-400 and U-401 (page 10).
1/32”ODFEPTubingSleeves
These 1.6” long sleeves facilitate connecting capillary tubing into
ports designed for 1/32” OD tubing. Please refer to the product
listing below to select the appropriate sleeve for your capillary OD size.
These sleeves can be used at up to 50 ºC and have a pressure rating
of 1,750 psi (121 bar).
Tubing Sleeves
1/32”ODPEEKTubingSleeves
These 1.6” long Upchurch Scientifc
®
1/32” OD PEEK Tubing Sleeves
can be usedwith any ftting designed for 1/32”OD tubingwhen smaller
tubing must be connected (see the Application Note on this page).
Select the appropriate sleeve from the product listing for your capillary
tubing OD size. The 1/32” OD PEEK Tubing Sleeves have a maximum
recommended temperature of 125 ºC and have a pressure rating of
5,000 psi (345 bar).
Part No. ID
For Tubing OD Size Color Qty.
PEEK Tubing Sleeves For 1/16” OD Fittings
F-225 125 µm (0.005”)
70 – 110 µm
Red
ea.
F-226 180 µm (0.007”)
125 – 165 µm
Yellow
ea.
F-227 230 µm (0.009”)
175 – 215 µm
Yellow
ea.
F-228 250 µm (0.011”)
225 – 265 µm
Blue
ea.
F-229 330 µm (0.013”)
275 – 315 µm
Natural
ea.
F-230 405 µm (0.016”)
350 – 390 µm
Orange
ea.
F-231 560 µm (0.022”)
505 – 545 µm
Natural
ea.
F-232 785 µm (0.031”)
730 – 770 µm
Natural
ea.
F-233 865 µm (0.034”)
785 – 825 µm
Blue
ea.
F-234 685 µm (0.027”)
630 – 670 µm
Yellow
ea.
PEEK Tubing Sleeves for 1/32” OD fittings
F-380x 125 µm (0.005”)
70 – 110 µm
Red
10-pk
F-381x 180 µm (0.007”)
125 – 165 µm
Yellow
10-pk
F-382x 205 µm (0.008”)
150 – 190 µm
Natural
10-pk
F-383x 230 µm (0.009”)
175 – 215 µm
Gray
10-pk
F-384x 255 µm (0.010”)
200 – 240 µm
Blue
10-pk
F-385x 380 µm (0.015”)
325 – 365 µm
Natural
10-pk
F-386x 510 µm (0.020”)
455 – 495 µm
Orange
10-pk
F-387x 250 µm (0.011”)
225 – 265 µm
Red
10-pk
F-388x 330 µm (0.013”)
275 – 315 µm
Black
10-pk
FEP TUBING SLEEVES for 1/32” OD fittings
F-370x 75 μm (0.003”)
20 – 60 μm
Natural
10-pk
F-371x 125 μm (0.005”)
70 – 110 μm
Red
10-pk
F-372x 180 μm (0.007”)
125 – 165 μm
Yellow
10-pk
F-373x 230 μm (0.009”)
175 – 215 μm
Natural
10-pk
F-374x 280 μm (0.011”)
225 – 265 μm
Blue
10-pk
F-375x 330 μm (0.013”)
275 – 315 μm
Orange
10-pk
F-376x 395 μm (0.0155”)
340 – 380 μm
Green
10-pk
Clockwise, starting at top:
1/16” OD PEEK Tubing Sleeves, shown with F-140 Fitting
1/32” OD PEEK Tubing Sleeves, shown with F-126H Fitting
1/32” OD FEP Tubing Sleeves, shown with F-126S Fitting
Fittings and tubing only shown to highlight how sleeves are designed
to be used; they are not included with the sleeves
Use 1/32” OD PEEK or FEP Sleeves to connect capillary tubing with
the following:
The F-113 Ferrule and Two-Piece Fingertight Fittings for 10-32 ports
(page 15).
The F-112 (page 139) and P-416BLK MicroTight
®
Fittings (page 140) —
1/32” OD PEEK Tubing Sleeves only.
The 1/32” OD MicroTight Fittings on page 18.
The Rheodyne
®
RheFlex M4 Fitting (page 12) for MX Module applications.
The M-645 Valco
®
-Compatible Fitting (page 11) for Valco Nanovolume
®
valve applications.
Top Seller
See starred products
Related Products
FOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com