Page 46 - IDEX_Catalog20112012

Connectors

1.10”

(2.79 cm)

0.67”

(1.70 cm)

U-466 and U-466S

Static Mixing Tees

with F-300 Fingertight Fittings

for 1/16” OD tubing

PressureGaugeTee

Complete with stainless steel fttings

Many HPLC systems have pumps that provide a digital readout of

the inline system pressure. However, a number of systems do not,

creating the need for a gauge along your 1/16” OD tubing pathway to

monitor pressure. The Upchurch Scientifc U-433 Pressure Gauge Tee

is the solution. This Tee comes complete with 10-32 coned stainless

steel fttings for 1/16” OD tubing and has an internal port suitable

to connect to 1/4” pipe threads (NPT), standard to most gauges.

Please Note: A pressure gauge is not included with this Tee; however,

they are available from a number of laboratory supply companies.

Before installing your gauge into this Tee, simply wrap PTFE tape

around the male threads of your pressure gauge four times. This will

ensure a leak-free seal, even at standard HPLC operating pressures.

High Pressure Specialty Tees

StaticMixingTees

PEEK

™

body with two-piece fngertight fttings

Low swept volume

Upchurch Scientifc

Static Mixing Tees are ideal for microbore or

analytical gradient HPLC. They have a low swept volume of 2.2 µL

(includes frit volume) and are designed for flow rates of 0.5 to

3 mL/min and a maximum pressure of 5,000 psi (345 bar). The back

pressure caused by the tee is typically only 10 to 20 psi (0.7 to 1.4 bar)

at these fow rates. The thru-holes are 0.020” (0.50 mm) and the center

port features a 10 µm UHMWPE or stainless steel frit that aids mixing.

Please Note: Turbulent mixing of solvents often increases outgassing.

To maintain a bubble-free fluid pathway, we recommend solvent

degassingwhen using this product (see the Systec

VacuumDegassing

Systems on pages 177–178).

0.87”

(2.21 cm)

0.97”

(2.46 cm)

U-433

Pressure Gauge Tee

with U-400/U-401 Stainless Steel Fittings

for 1/16” OD tubing

Part No. Description

Threads

Includes

Thru-hole

Swept Volume Pressure Rating

STATIC MIXING TEE

U-466

PEEK Static Mixing Tee for 1/16” OD Tubing, 10 µm UHMWPE Frit 10-32 Coned

(3) F-300

0.020” (0.50 mm) 2.2 µL

5,000 psi (345 bar)

U-466S PEEK Static Mixing Tee for 1/16” OD Tubing, 10 µm SST Frit

10-32 Coned

(3) F-300

0.020” (0.50 mm) 2.2 µL

5,000 psi (345 bar)

PRESSURE GAUGE TEE

U-433 Stainless Steel Pressure Gauge Tee for 1/16” OD Tubing

10-32 Coned

(2) U-400, (2) U-401 0.040” (1.00 mm) 1.2 µL

10,000 psi (690 bar)

The frit incorporated into our U-466 and U-466S Static Mixing Tees is not

replaceable. If it becomes clogged, the Mixing Tee must be replaced.

Note

Our Micro Static Mixing Tee can be found on the next page. It is designed

for microfow applications.