67
Tubing
Spiral-Link
™
Tubing
Preformed PEEK
™
tubing into a convenient spiral for a sample loop
or to facilitate tubing movement
Many volumes available
The coils of our 1/16” OD Spiral-
Link tubing expand and contract,
allowing you to more easily move
your system components or even
make equipment repairs whenever
needed, without the hassle of
breaking connections.
Upchurch Scientific
®
Spiral-Link
tubing is made of PEEK polymer,
a biocompatible, chemically inert
material. Spiral-Links come in six different lengths. Our proprietary
extrusion process ensures color permanence.
Each Spiral-Link ships with two F-287 SealTight
™
Fittings.
Radel
®
Tubing
Withstands up to 12,500 psi (862 bar)
Transparent and autoclavable
1/16” or 1/8” outside diameter available
Maximum continuous use temperature: 100 ºC
Radel (polyphenylsulfone) is a mechanically strong and chemically
resistant material, much like PEEK. Radel is frequently used in medical
applications where repeated autoclave sterilization is performed
(tests show product stability even after 1,000 cycles). Radel tubing
is also transparent, allowing technicians to visually monitor flow
through their instrument. Readily wetted surfaces help keep air bubbles
from accumulating on inner surfaces.
Please visit our website, www.idex-hs.com, for more information
regarding chemical compatibility of Radel.
High Pressure Tubing
Radel Tubing Specifcations
Tubing OD
OD Tolerance
Tubing ID
ID Tolerance
1/16”
±0.001” (25 µm)
All
±0.001” (25 µm)
1/8”
±0.003” (75 µm)
All
±0.003” (75 µm)
Part No. ID
Length
(Prior to Coiling) Max coil span Volume
SPIRAL LINK TUBING, 1/16” OD
17202 0.25 mm (0.010”) 20 cm (8”)
1.3 cm (0.5”)
10 μL
17204 0.25 mm (0.010”) 40 cm (15.75”)
6.1 cm (2.4”)
20 μL
17205 0.25 mm (0.010”) 50 cm (19.69”)
7.6 cm (3.0”)
25 μL
17210 0.25 mm (0.010”) 100 cm (39.37”)
17.8 cm (7.0”)
51 μL
17220 0.25 mm (0.010”) 200 cm (78.74”)
33 cm (13.0”)
101 μL
RADEL TUBING, 1/16” OD
Part No. ID
Length
Color Max Pressure Volume
1210 0.25 mm (0.010”) 1.5 m (5’) Natural 12,500 psi (862 bar) N/A
1210L 0.25 mm (0.010”) 15 m (50’) Natural 12,500 psi (862 bar) N/A
1210XL 0.25 mm (0.010”) 30 m (100’) Natural 12,500 psi (862 bar) N/A
1220 0.50 mm (0.020”) 1.5 m (5’) Natural 7,500 psi (518 bar) N/A
1220L 0.50 mm (0.020”) 15 m (50’) Natural 7,500 psi (518 bar) N/A
1220XL 0.50 mm (0.020”) 30 m (100’) Natural 7,500 psi (518 bar) N/A
1230 0.75 mm (0.030”) 1.5 m (5’) Natural 5,500 psi (379 bar) N/A
1230L 0.75 mm (0.030”) 15 m (50’) Natural 5,500 psi (379 bar) N/A
1230XL 0.75 mm (0.030”) 30 m (100’) Natural 5,500 psi (379 bar) N/A
RADEL TUBING, 1/8” OD
1235 1.55 mm (0.062”) 1.5 m (5’) Natural 4,500 psi (310 bar) N/A
1235L 1.55 mm (0.062”) 15 m (50’) Natural 4,500 psi (310 bar) N/A
1235XL 1.55 mm (0.062”) 30 m (100’) Natural 4,500 psi (310 bar) N/A
Note
In addition to 0.010” ID shown in the price block below, Spiral-Link tubing
is also available with the following IDs: 0.005” (125 µm), 0.020” (0.50 mm)
and 0.030” (0.75 mm), all with 1/16” OD. Please contact us or an IDEX
Health & Science Distributor for more information, or fnd these products
at www.idex-hs.com.
Top Seller
See starred products
Some customers report using longer lengths of polymer tubing to add a little
back pressure to their system. A more precise way to achieve this objective is
to use one of our Back Pressure Regulators, found on page 152.
Related Products
FOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com