80
Tubing
Flexible Peristaltic Tubing
Tygon
®
2001Tubing for AggressiveMedia
High chemical resistance for broad application use
Options available for single and multi-channel pump systems
Ultra-pure tubing for peristaltic pumps
Tygon 2001 tubing features all of the benefts of most Tygon blends –
including wall transparency and FDA approval. Added to this is strong
chemical resistance for many solutions (excluding hydrocarbons),
making Tygon 2001 a material of choice for many demanding
applications where other blends may not be suitable.
Options are available in both Standard Tubing, up to 0.626” (15.9 mm)
and Stopper Tubing up to 0.109” (2.79 mm).
Application Note
Smooth inner surface, low sorption maintains fuid and tube integrity.
Transparent for visible fow monitoring
Coating of tablets
Laboratory analysis and dispensing
Chemical-based fow in waste water treatment
Special Properties The transparent, plasticiser-free tubing with superior pump-life.
Especially designed for MEK and other aggressive solvents.
Advantages
• Plasticizer and oil-free
• Smooth inner-bore
• Low sorption maintains fuid and tube integrity
• Does not impart anything into the pumping medium
• No release of hazardous materials when properly incinerated
Limitations
None
Physical Properties Polyolefn
Service Temperature
Range
-73 °C to +57 °C (-100 °F to +135 °F)
Applications
Acids Excellent
Alkaline solutions Excellent
Solvents Good / Excellent
Complies with the
Following Standards
FDA certifcation for food contact
Sterilization
Autoclaveable with steam, 30 minutes at 1 bar (15 psi)
and 141 °C (250 °F). Gas sterilization with Ethylene oxide.
Sterilization with radiation up to 2.5 mrad.
Permeability
Volume of gas [cm3] x wall thickness {mm]
Area of tubing ID [cm2] x time [sec]
x pressure drop across tubing wall [cm Hg]
x 10
-10
CO
2
1140
O
2
76
N
2
190
Odor and taste No odor or taste
Toxicity
–
Tubing
life
at 0 bar 75 hrs
at 0.7 bar –
Specifcations
Part No. ID
OD
Length
Standard Tubing
Tygon 2001 Tubing, 1.6 mm WT
SC0830 0.062” (1.6 mm) 0.189” (4.8 mm)
49.2’ (15 m)
SC0831 0.126” (3.2 mm) 0.252“ (6.4 mm)
49.2’ (15 m)
SC0832 0.189” (4.8 mm) 0.315” (8 mm)
49.2’ (15 m)
SC0833 0.252” (6.4 mm) 0.378” (9.6 mm)
49.2’ (15 m)
SC0834 0.315” (8 mm) 0.441” (11.2 mm)
49.2’ (15 m)
SC0835 0.374” (9.5 mm) 0.50” (12.7 mm)
49.2’ (15 m)
Tygon 2001 Tubing, 3.2 mm WT
SC0845 0.50” (12.7 mm) 0.752” (19.1 mm)
49.2’ (15 m)
SC0846 0.626” (15.9 mm) 0.878” (22.3 mm)
49.2’ (15 m)
Stopper Tubing
Part No. ID
OD
Color
Length Qty.
Tygon 2001 2-Stop Tubing for CA Cassettes, 0.9 mm WT
SC0814 0.014” (0.38 mm) 0.085” (2.18 mm) orange-green 15” (381 mm) 6-pk
SC0816 0.025” (0.64 mm) 0.096” (2.44 mm) orange-white 15” (381 mm) 6-pk
Tygon 2001 2-Stop Tubing for CA Cassettes, 0.85 mm WT
SC0818 0.04” (1.02 mm) 0.107” (2.72 mm) white-white 15” (381 mm) 6-pk
SC0820 0.059” (1.52 mm) 0.127” (3.22 mm) yellow-blue 15” (381 mm) 6-pk
SC0822 0.081” (2.06 mm) 0.148” (3.76 mm) purple-purple 15” (381 mm) 6-pk
SC0824 0.109” (2.79 mm) 0.177” (4.49 mm) purple-white 15” (381 mm) 6-pk
Tygon 2001 2-Stop Tubing for MS/CA Cassettes, 0.9 mm WT
SC0802 0.015” (0.38 mm) 0.085” (2.18 mm) orange-green 15” (381 mm) 6-pk
SC0804 0.025” (0.64 mm) 0.096” (2.44 mm) orange-white 15” (381 mm) 6-pk
Tygon 2001 2-Stop Tubing for MS/CA Cassettes, 0.85 mm WT
SC0806 0.04” (1.02 mm) 0.107” (2.72 mm) white-white 15” (381 mm) 6-pk
SC0808 0.059” (1.52 mm) 0.127” (3.22 mm) yellow-blue 15” (381 mm) 6-pk
SC0810 0.081” (2.06 mm) 0.148” (3.76 mm) purple-purple 15” (381 mm) 6-pk
SC0812A 0.109” (2.79 mm) 0.177” (4.49 mm) purple-white 15” (381 mm) 6-pk
Maximum recommended operating pressure can be found on page 199.
Note
FOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com