89
Tubing
Flexible Peristaltic Tubing
GORE
™
Tubing for Special Applications
For single channel tubing pumps
Aggressive media
High-pressure applications
GORE Style 100 for High-Pressure Applications
Extremely stable fow rates
Variability in fow rate within 1% during total life time
Virtually eliminates spallation (ensures continuously high purity
in fuid transfer)
For differential pressures up to 4 bar (60 psi)
High burst strength up to 25 bar (360 psi)
Exhibits 18 times the life of silicone rubber tubing
GORE Style 100
GORE Style 100CR
Unique pressed composite material, not
extruded, produced in clean room
Fluoroelastomer tubing with expanded PTFE,
not extruded, produced in clean room
Platinum cured Silicone and expanded PTFE 1.6 to 16 mm ID
Available in bore sizes up to 50 mm ID
Permanently stable fow rates
USP Class VI approved and classifed nontoxic USP Class VI approved
Cited in FDA Type II Material Master File (MMF) FDA approved for food contact
Operates at pressures up to 4 bar (60 psi) Operates at pressures up to 4 bar (60 psi)
In-line steam sterilizable
Specifcations
GORE Style 100
GORE Style 100CR
In pharmacuetical, food and biotech processes
In electronic, medical, textile, industry
• Tangential fow fltration and other
high-pressure applications
• Addition of anti-foam
• Long-term fermentation: continuous
media recirculation over 75 days
• Transfer of live-cells from one container
into another featuring excellent service
life at low temperatures
• Ultra-fltration: high pressure stability
allows higher system pressure and fow
rate, which results in longer service life and
fewer down-times due to tube exchanges
• Solvent-based ink for gravure printing
• Coating of glass bottles
• Chemical coating of plastic plates
and flm
• Chemical-based fow in waste
water treatment
• Solvent-based coating of tablets
• Synthesis with high through-put
• Laboratory analysis or dispensing
Application Note
Part No.
ID
OD
Length
Standard Tubing
GORE 100 Tubing, 0.8 mm WT
GX0015
0.11” (2.8 mm)
0.173” (4.4 mm)
1’ (305 mm)
GORE 100 Tubing, 1.6 mm WT
GX0018
0.063” (1.6 mm)
0.189” (4.8 mm)
1’ (305 mm)
GX0004
0.126” (3.2 mm)
0.252” (6.4 mm)
1’ (305 mm)
GX0014
0.189” (4.8 mm)
0.315” (8.0 mm)
1’ (305 mm)
GX0013
0.315” (8.0 mm)
0.437” (11.1 mm)
1’ (305 mm)
GORE 100 Tubing, 2.4 mm WT
GX0005
0.189” (4.8 mm)
0.378” (9.6 mm)
1’ (305 mm)
GX0006
0.252” (6.4 mm)
0.437” (11.1 mm)
1’ (305 mm)
GX0002
0.315” (8.0 mm)
0.125” (12.7 mm)
1’ (305 mm)
GX0017
0.374” (9.5 mm)
0.555” (14.1 mm)
1’ (305 mm)
GORE 100 Tubing, 3.2 mm WT
GX0007
0.252” (6.4 mm)
0.125” (12.7 mm)
2’ (610 mm)
GX0001
0.374” (9.5 mm)
0.156” (15.9 mm)
2’ (610 mm)
GX0003
0.125” (3.2 mm)
0.378” (9.6 mm)
2’ (610 mm)
GORE 100CR Tubing, 0.8 mm WT
GX0106
0.11” (2.8 mm)
0.173” (4.4 mm)
1’ (305 mm)
GORE 100CR Tubing, 1.6 mm WT
GX0008
0.063” (1.6 mm)
0.189” (4.8 mm)
1’ (305 mm)
GX0011
0.126” (3.2 mm)
0.252” (6.4 mm)
1’ (305 mm)
GX0010
0.189” (4.8 mm)
0.315” (8.0 mm)
1’ (305 mm)
GX0012
0.252” (6.4 mm)
0.374” (9.5 mm)
1’ (305 mm)
GX0009
0.315” (8.0 mm)
0.437” (11.1 mm)
1’ (305 mm)
GORE 100CR Tubing, 2.4 mm WT
GX0124
0.189” (4.8 mm)
0.374” (9.5 mm)
14” (355 mm)
GX0123
0.252” (6.4 mm)
0.437” (11.1 mm)
14” (355 mm)
GX0019
0.315” (8.0 mm)
0.125” (12.7 mm)
14” (355 mm)
GORE 100CR Tubing, 3.2 mm WT
GX0131
0.374” (9.5 mm)
0.156” (15.9 mm)
2’ (610 mm)
GORE Style 100CR for Aggressive Media
Extremely long life perfuorelastomer tubing
Stable fow rates, variation less than 1% over tubing life
Low solvent swell
Extreme long service life
Suitable for almost all aggressive chemicals, including organic
solvents such as methylethylketone, toluene and acetone
Related Products
Gore Style 100 tubing can be used with the Flowmaster
®
dispensing
pump found on page 97, which pumps up to 13 L/min.
Gore Style 100CR tubing can be used for the REGLO Quick
™
tubing pump
found on page 96, which pumps up to 230 mL/min.
FOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com