J U S T R I T E
®
WA S T E C ANS
Ideal for HPLC use, Justrite
®
Centura
TM
containers streamline the
waste containment and disposal process by providing a simple means
of connecting waste and vent lines. FM approved, the containers are
designed with a spring-loaded closure that opens when contents are
subjected to pressure, for explosion saftey. Containers are molded
of translucent Polyethylene to show fluid level. When ordering, note
that quick disconnects will only mate with like materials, i.e., stainless
disconnects with stainless. Note that the disconnects mounted on
all containers have a 3/8” drain orifice. Also note that Justrite
®
containers should be grounded with Antistatic Wires while in use, and
especially while emptying the container.
Two Polypropylene or Stainless Steel quick
disconnects permit simple attachment of one
inlet and one vent
JT-TF12755
5-gallon waste can with
Stainless / PTFE
disconnects
JT-PP12752
2-gallon waste can with
Polypropylene / EPDM disconnects
ANTISTATIC WIRES
REDUCE FIRE RISKS FROM STATIC
ELECTRICITY
Antistatic wires reduce spark danger
from static electricity generated by
movement and flow of flammable liq-
uids. Bonding between containers dur-
ing liquid transfer, and conecting drums
to an earth ground are required under
Federal and local codes.
JT-08500
Antistatic wires with 3’ cable
$ 129.00
134.00
149.00
WASTE CONTAINERS
JT-12160
Justrite
®
1-gallon PE can, PP / EPDM disconnect
JT-PP12752
Justrite
®
2-gallon PE can, PP / EPDM disconnect
JT-TF12752
Justrite
®
2-gallon PE can, SS / Tefon
®
disconnect
JT-PP12755
Justrite
®
5-gallon PE can, PP / EPDM disconnect
JT-TF12755
Justrite
®
5-gallon PE can, SS / Tefon
®
disconnect
ANTISTATIC WIRES
JT-08500
Justrite
®
antistatic wire, dual alligator clips, 3’
SECONDARY CONTAINMENT
SC-002
Secondary containment for Justrite 2 or 5-gal can
WASTE CANS, ANTISTATIC WIRES, AND CONTAINMENT
SF-003
Funnel with PP / EPDM disconnect
SF-004
Funnel with SS / Viton
®
disconnect
SF-005
Funnel with SS / Tefon
®
disconnect
SAFETY WASTE FUNNELS
SF- series funnels adapt to CPL safety Eco Funnels to allow
quick disposal of pourable solvent waste. Locking, hinged lid
minimizes leaks and spills when the funnel is closed. Standard
Justrite Centura
TM
containers include two quick disconnects,
one for filling and one for venting; removal of the insert from
the venting quick disconnect will prevent vapor release while
not in use. If used in tandem with other Vaplock
TM
products,
such as manifolds and vapor filters, a closed systemmay also
be maintained for passive wastes while the funnel is sealed.
As with all solvent-based applications,
chemical compatibility
of the solvent and product should be noted prior to purchase.
SF-series funnels are constructed of high density Polyethylene
(HDPE) and Polypropylene, with a closed-cell Polypropylene
sealing gasket. As Justrite Centura containers are available
with two quick disconnect materials, Polypropylene (with EPDM
o-ring) and Stainless Steel (with Teflon o-ring),
select a safety
funnel according to the type of disconnect material.
.
Quick-connect to Justrite Centura
TM
waste cans
HDPE and Polypropylene construction
Locking lid with Polypropylene sealing gasket
CP L SAF E TY ECO FUNNE L S
FOR JUSTR I T E
®
CANS
CP
LabSafety
Safety Eco Funnel
TM
is a trademark of CP Lab Safety.