177
Debubblers & Degassers
Stand Alone MINI Degassers
Part No. Number of Channels
Channel Volume
Max HPLC Gradient
Flow Capability
B
Pressure Drop
C
Degassing Flow Path ID
SYSTEC STAND ALONE MINI VACCUUM DEGASSING SYSTEMS – AVAILABLE CONFIGURATIONS
A
0001-6500 2
480 µL
2.0 mL/min
0.18 bar/mL/min
0.045” (1.14 mm)
0001-6501 4
480 µL
2.0 mL/min
0.18 bar/mL/min
0.045” (1.14 mm)
A. Custom confgurations are available. Consult us for your own OEM solution to your specifc application.
B. The fow rates given are for a gradient mixture of 50/50 MeOH/H
2
O, with a typical low pressure gradient mixing valve. Higher fow rates are possible with high pressure mixing.
C. Estimated tubing pressure per unit change in fow assuming laminar fow with a viscosity of 1.0 cP
Validation Output
A 2-pin rear panel receptacle labeled “Validation” with mating screw-lock
plug is provided to allow a validation signal from the control circuit to be sent
to a computer or data system. This validation output indicates vacuum level.
Signal:
5mV DC 0.13 bar (1 mmHg) / absolute from 2.7 to
106.7 bar (20 to 800 mmHg) (0.100 V DC at 2.7 bar
(20 mmHg); 4.000V DC at 1.067 bar (800 mmHg))
Accuracy:
±1.0% of reading ±0.010V DC from 2.7 to 106.7 bar
(20 to 80 mmHg)
Power Requirement
Input Power required with AC Adapter (included):
100 to 240V AC (±10%), 1A, 50 to 60 Hz (±3 Hz)
Four interchangeable wall sockets are supplied with the AC Adapter:
North America/Japan, U.K., Continental Europe, Australia.
CE Certifcation
This product has been certifed under the following CE testing standards:
EN61326-1; EN55011; EN61300-3-2; EN61300-3-3 & EN61010-1.
Note
Systec
®
StandAloneMINI Vacuum
DegassingSystem
Ultra-high degassing effciency
Low volume, easy to prime
Patented control eliminates baseline fuctuations
Single lumen design for consistent degassing
Inert fow path
5+ year lifetime
The Systec StandAloneMINI HPLC vacuumdegassing system for HPLC
is a high effciency in line module that removes dissolved gasses from
HPLC mobile phases. Its unique design assures reliable continuous
operation and the highest level of continuous performance available
without the need for helium degassing. Up to fve solvent lines may
be degassed simultaneously by one unit.
ZHCR
®
Control with Built-in Test Diagnostics
Microcontroller self-test vacuum sensor validation on power-up
Continuous vacuum system monitoring to ensure optimum
operational conditions are maintained
Vacuum system fault detection and shutdown function indicators
AF / ZHCR Degassing Technology
Flow-through vacuum degassing chamber with a single amorphous
perfluorinated copolymer (Systec AF
®
) degassing membrane,
enabling degassing effciency 50 times that of PTFE.
The ZHCR (Zero Hysteresis / Constant Run) vacuum pump employs a
patented closed-loop, micro-stepping RPMcontrol strategy permitting
the pump to run with continuously variable speed, providing quick
pull-down at high RPM, and then sustaining a consistent vacuum level
at low RPM.
Fluctuations in detector baseline due to changes in vacuum level are
eliminated by not having to repeatedly stop and start a single-speed
pump. This also greatly reduces wear and noise.
The brushless motor enables quiet operation and is appropriate for
environments where solvent vapors may be present.
POWER STATUS VACUUM
EXHAUST
VALIDATION
POWER
15-24V
DC
0.85A MAX.
5.17
[131mm]
2.87
[73mm]
10.35
[263mm]
Overall Dimensions
5.17”
(131 mm)
2.87”
(73 mm)
10.35”
(263 mm)
Top Seller
SEE STARRED PRODUCTS
FOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com