181
Column Hardware
Column Hardware & Accessories
Part No.
Description
MODULAR COLUMN HARDWARE
5041IV-04021-025-20 2.1 x 250.0 mm Modular Assembly with 2 µm SST Frit
5041IV-05046-025-20 4.6 x 250.0 mm Modular Assembly with 2 µm SST Frit
5041IP-10100-025-20 10.0 x 250.0 mm Modular Assembly with 2 µm SST Frit
5041IP-19212-025-20ED 21.2 x 250.0 mm Modular Assembly with 2 µm SST Frit
5041IP-24300-025-20 30.0 x 250.0 mm Iso-Prep
™
Assembly with 2 µm SST Frit
5060IP-56500-025-20 50.0 x 250.0 mm Iso-Prep Assembly with 2 µm SST Frit
MODULAR COLUMN PACKING ADAPTERS
3118-21
2.0 – 2.1 mm Modular Packing Adapter with Seal
3118-46
4.6 mm Modular Packing Adapter with Seal
3108
10.0 mm Modular x 0.5” Compression with Seal
3107
21.2 mm Modular x 1.0” Compression with Seal
7050-RT
Frit Cap Removal Tool 1.0 – 4.6 mm ID
COMPRESSION COLUMN HARDWARE
101-04021-025EP
2.1 x 250 mm x 1/4” Isobore Compression Tube
101-04046-025EP
4.6 x 250 mm x 1/4” Isobore Compression Tube
7020-20
4.6 mm x 0.032”, 2 µm PEEK Encapsulated Frit
7021-20
2.1 mm x 0.032”, 2 µm PEEK Encapsulated Frit
4-1V
0.250” Compression, 4.6 mm Distribution Cone
4-1V2.1
0.250” Compression, 2.1 mm Distribution Cone
9012S
Compression Packing Adapter, 0.25” OD, 1.0 – 4.6 mm ID
SST = Stainless Steel
CompressionColumnSystems
Multiple port confgurations
Leak-free frits
Isolation Technologies compression systems ensure that the ferrule
is properly seated on the tube and locked in place so that it does not
slip off during the high-pressure packing process. Proper assembly of
the tube and frit within the end ftting ensures the integrity of the fow
path. Improper assembly can lead to poor chromatography or loss of
packing material.
Compression column tubing is available in Isoboregrade. Featuring
a surface fnish (Ra) of <15 µinch with typical values around 8 µinch.
This highly polished tubing is recommended for use with 5 µmpacking
materials (and smaller) and with small internal diameter columns (<3.0
mm inner diameter).
Isolation Technologies compression systems come with a PEEK
encapsulated frit, reducing the potential for leaks and silica bypass.
Internal Diameters (mm): 1.0, 2.1, 3.0, 4.0, 4.6, 7.8, 9.4, 10.0
Lengths (mm): 33, 50, 75, 100, 125, 150, 200, 250, 300
Please Note: Compression Systems are available in custom IDs and
lengths — almost any size is possible. Contact us for more details.
Modular ColumnSystems
Precision machined from high purity LC grade 316 stainless steel
Modern high performance confguration
Safer and easier to pack than compression columns
Modular hardware guarantees a high pressure seal between the tubing
and end ftting, as well as ensures proper seating of the frit. The frit
is contained in a cap that slides over the column, forming a leak-free
and gap-free seal.
All stainless steel modular columns use our
exclusive Isobore
™
internal surface fnish.
This unique finish reduces drag at the column wall and improves
column effciency and performance by providing an extremely smooth,
fat, and clean surface. (The Isobore surface fnish is <15 µinches, with
typical values around 8 µinches.)
Modular column hardware is supplied with the following components:
One 316 stainless steel column body
Two one-piece end fttings
Two frit caps containing 316 stainless steel frits in a PEEK
™
cap
Internal Diameters (mm): 1.0, 2.1, 3.0, 4.0, 4.6, 7.8, 10.0, 21.2, 30.0, 50.0
Lengths (mm): 20, 33, 50, 75, 100, 125, 150, 200, 250, 300, 500
Please Note: Modular Systems are available in custom IDs and
lengths — almost any size is possible. Contact us for more details.
Modular ColumnPackingAdapters
Isolation Technologies
™
modular packing adapters are used to
connect modular style column hardware to high pressure column
packing reservoirs. The adapters feature a three-piece threaded
design for safety and easy removal and replacement of the PEEK
sealing ring. Modular packing adapters are available for inner diameters
from 2.1 mm to 21.2 mm.
FOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com