74
Tubing
Tubing Cutters
FusedSilica TubingCutters
We offer a precision cutter for
fused silica tubing — SGT’s
Shortix
™
Cutter (FS-315). This
cutter ensures clean, trouble-
free cutting of fused si l ica
tubing, providing better cuts
than any other product on the
market. It also includes a built-in
magnifying glass to examine
the cut tubing ends. Order the
FS-315-02Maintenance Kit, as needed, to replace a worn or damaged
cutting wheel.
When using traditional fused silica tubing cutters, only a small part of
the tubingwall is scratched, then the tubing is snapped or pulled in two,
often resulting in a jagged, uneven cut. With a Shortix Cutter, a clean
cut is made every time, regardless of skill or experience, as the cut is
made by rotating a diamond blade around the entire circumference
of the tubing.
Please Note: The FS-315 Fused Silica Tubing Cutters are designed
to cut only tubing with ODs of 350 µm – 780 µm and IDs of
100 µm – 350 µm.
FS-315
for fused silica tubing
Polymer TubingCutters
For 1/16”, 1/8”, 3/16”, 1/4” and 5/16” OD tubing
A fat, 90˚, burr-free cut is diffcult to obtain with most commercial
polymer tubing cutters. Upchurch Scientifc
®
has designed several
tubing cutters specifcally to cut polymer tubing. This line of tubing
cutters includes a standard cutter for 1/16” and 1/8”OD tubing (A-327),
and another for large bore tubing (A-329). Each has guide holes to
ensure precise cutting. These cutters are durable, reliable and easy
to operate. Five replacement blades are included with each cutter.
A-329
for 3/16” - 5/16” OD tubing
A-327
for 1/16” and 1/8” OD tubing
Capillary Polymer TubingCutter
The Upchurch Scientific A-350 Cutter is designed to cut capillary-
sized polymer tubing. The cutter makes clean, perpendicular cuts
without collapsing thin capillary walls. A set of ten tubing sleeves,
required for cutting, are included with each cutter, along with fve
replacement blades. The included tubing sleeves are for cutting
360 µm OD polymer capillary tubing. Alternative sleeves are
available for cutting 510 µm and 1/32” OD tubing. All tubing sleeves
are 2” long and are made of DuPont
®
FEP.
Polymer TubingCutter for 2.0mmODTubing
Upchurch Scientifc introduces a new tubing cutter specifcally for
cutting 2.0 mm OD polymer tubing. The A-370 tubing cutter is
designed to cut in a similar method to the A-350 capillary polymer
tubing cutter. The tubing slides through the cutter and the knob is
rotated to spin the tubing as the razor blade circumscribes the tubing,
providing a very clean, perpendicular cut.
A-350
for capillary polymer tubing
Part No. Description
Qty.
FUSED SILICA Tubing Cutters
FS-315 Shortix Fused Silica Tubing Cutter
ea.
capillary POLYMER Tubing Cutter
A-350 Capillary Polymer Tubing Cutter* for 360 µm – 1/32” OD tubing
Includes (1) F-262x 10-pack of sleeves and (1) M-438-03 wrench
ea.
F-262x Replacement Sleeves for A-350, 0.0155” ID, Green,
for cutting 360 µm OD tubing
10-pk
F-264x Alternative Sleeves for A-350, 0.021” ID, Natural,
for cutting 510 µm OD tubing
10-pk
F-267Bx Alternative Sleeves for A-350, 0.033” ID, Blue,
for cutting 1/32” OD tubing
10-pk
A-327 Standard Polymer Tubing Cutter* for 1/16” and 1/8” OD tubing ea.
A-329 Large Bore Polymer Tubing Cutter* for 3/16”– 5/16” OD tubing ea.
A-328 Replacement Blades for A-350, A-370, A-327 and A-329
5-pk
A-370 Polymer Tubing Cutter for 2.0 mm OD tubing
ea.
* Includes (1) A-328 5-pack of replacement blades
The A-350 Capillary Polymer Tubing Cutter can be used to cut tubing
OD sizes other than 360 µm, 510 µm and 1/32”. Simply use the proper
NanoTight
™
Tubing Sleeve found on page 17. Please note, however,
that these sleeves are shorter than those listed on this page, and
therefore will last through fewer cuts.
Our tubing cutters are material specifc: the A-327, A-329 and A-350
should only be used to cut polymer tubing, where as the FS-315
should only be used to cut fused silica tubing.
Note
Top Seller
See starred products
FOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com