Page 77 - IDEX_Catalog20112012

75
Tubing
Flexible Peristaltic Tubing
Tubing Tygon®
ST
Tygon
LFL
TYGON
2001
Tygon
MHLL
TYGON
F-4040-A
Tygon MH
2075
(no longer available)
Page 78 79 80 81 82 83
Description The inexpensive all-round
tubing for general
laboratory applications.
• Transparent
• Resistant to almost all
inorganic chemicals
• Tasteless
• Smooth polished inner
wall
• Low gas permeability
• Non-aging and non-
oxidizing
• High dielectric constant
The tubing with the
longest service-life of any
clear Tygon tubing.
• Transparent
• Broad chemical
resistance
• Tasteless
• Extremely low particulate
spallation
• Meets USP Class VI and
FDA criteria
• Non-aging
• High dielectric constant
The transparent,
plasticiser-free tubing
with superior pump-life.
Especially designed
for MEK and other
aggressive solvents.
• Plasticizer and oil-free
• Smooth inner-bore
• Low sorption maintains
fuid and tube integrity
• Does not impart anything
into the pumping
medium
• No release of hazardous
materials when properly
incinerated
Chemically resistant to
Acetone, MEK and other
aggressive solvents.
Long life tubing
• Plasticiser-free
• Smooth inner-bore
• Low sorption maintains
fuid integrity
• Minimal adhesion and
diffusion
• Suitable for MEK,
Acetone and other
corrosive solvents
• Long life tubing
The special tubing for
hydrocarbons, petroleum
products and distillates.
• Specially formulated to
transport hydrocarbons,
petroleum products and
distillates
• Ideal for gasoline,
kerosene, heating oils,
cutting liquids and
coolants based on
glycols
• High dielectric constant
• Low gas permeability
The environmental-
friendly tubing especially
designed for solvents.
• No additives
• No plasticizers
• Suitable for methyl ethyl
ketone (MEK), acetone
and other corrosive
solvents
• Extremely smooth inner
surface
• Easily disposable
Specifcations
OD
(outside diameter)
0.16 – 0.88”
(4.0 – 22.3 mm)
0.19 – 0.75”
(4.8 – 19.1 mm)
0.19 – 0.88”
(4.8 – 22.3 mm)
0.09 – 0.18”
(2.22 –- 4.63 mm)
0.19 – 0.75”
(4.8 – 19.1 mm
0.19 – 0.88”
(4.8 – 22.3 mm)
ID
(inside diameter)
0.03 – 0.61”
(0.8 – 15.9 mm)
0.06 – 0.5”
(1.6 – 12.7 mm)
0.06 – 0.61”
(1.6 – 15.9 mm)
0.01 – 0.1”
(0.38 – 2.79 mm)
0.06 – 0.5”
(1.6 – 12.7 mm)
0.06 – 0.61”
(1.6 – 15.9 mm)
Operating Temp -50 to 74 °C -50 to 74 °C -73 to 57 °C -70 to 74 °C -37 to 74 °C -70 to 52 °C
Certifcation(s) FDA 21 CFR 175.300
FDA 21 CFR 175.300;
US Pharmacopoeia
Class VI
FDA 21 CFR 177.2600;
FDA Approved for
contact with foods
FDA 21 CFR 177.2600;
US Pharmacopoea
Class VI
None
FDA 21 CFR 177.2600;
REACH Compliant;
US Pharmacopoea Class VI
Chemical Resistance
Acids Good Good Excellent Excellent Limited Excellent
Alkaline Solutions Good Good Excellent Excellent Not Recommended Excellent
Solvents Not Recommended Not Recommended Good Excellent Not Recommended Excellent
Pressure Fair Good Good Not Recommended Good Not Recommended
Vacuum Good Good Good Good Good Good
Viscous Media Excellent Excellent Excellent Good Excellent Good
Sterile Media Limited Limited Good Good Limited Good
Gas Permeability (at 25 ºC)*
CO2 360 563 1140 3800 100 4840
H2 — — — — — —
0
2 80 124 76 800 22 980
N2 40 67 190 320 12 350
* Permeability Coeffcient = Amount of Gas (cm3) x tubing wall thickness (cm)
x 10 -10
Surface Area of tubing ID (cm3) x time (sec) x pressure drop across tubing wall (cm Hg).
FOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com